LilyPad 328 на ATmega328P 16M

Description

The Arduino LilyPad is designed to be used as a piece of clothing.. It can be sewn into fabric with built-in power supplies, sensors and actuators with wiring. The platform is built on the ATmega328V microcontroller.

Characteristics:

• Microcontroller: ATmega328p
• Working voltage: 2,7-5,5 IN
• The current mode is indicated by the corresponding LED above the control knob 2,7-5,5 IN
• Features Arduino UNO R3 14 (6 of which can be used as PWM outputs)
• (6 of which can be used as PWM outputs) 6
• To Digital Inputs/Outputs: 40 mA
• Flash memory: 16 KB (2 used for bootloader)
• OZU: 1 (6 of which can be used as PWM outputs)
• (6 of which can be used as PWM outputs) 512 bytes
• Features Arduino UNO R3 8 MHz

Attention: Do not connect voltage, exceeding 5.5 IN, or change its poles, it may damage the platform.

Nutrition
Arduino LilyPad can be powered via USB connection or external power supply.

The voltage of the external power supply must be between 2.7 and 5.5 IN. Voltage can be supplied via AC/DC converter (power supply) or battery. Do not apply voltage, exceeding 5.5 IN, or change its poles, it may damage the platform.

physical characteristics
The LilyPad platform is shaped like a circle with a diameter 50 mm. The platform thickness is 0.8 mm, and at the place of installation of the microcontroller and outputs - 3 mm.

Wash fastness
It is possible to erase the platform. It is recommended to use mild detergents. Should not be pressed. Turn off the power before washing.