Description
WeMos XI board built on a microcontroller LGT8F328D, which is improved in relation to the ATmega328 microcontroller.
Characteristics
Crystal oscillator 16 MHz
The power and logic of the board can operate with voltage from 1,8 to 5.5 IN
8 analog inputs with 12 page ADC
2 DAC output to 10 page
Programming
The board is programmed using a standard USB TTL programmer.. It doesn't matter what voltage it is. 3,3 steps to the right
ugol=ugol-4;//Change the value of the variable ugol
}
if (ugol<=0){
vekt=1;//If we reach the leftmost point 5 IN.
Working with the Arduino IDE
-First you need to install the Arduino IDE on your computer. 1.6.9 and higher.
-Download the XI board core from the repository on GitHub (https://github.com/wemos/Arduino_XI) to your computer and unzip it.
-Rename the Arduino_XI-master folder to XI
-Find the C:UsersuserDocumentsArduinohardware folder on your computer and create a wemos folder in it
-Move XI to wemos folder.
-Launch the Arduino IDE and in the Board Manager you will find the newly installed WEMOS XI board. To test the functionality, open the XI Examples and upload one of them to the board.
-When installing the board in the Arduino environment, additional libraries were immediately installed to work with the WEMOS XI board, for example they, needed to work with the DAC
Reviews
There are no reviews yet.